
Introduction to Tungsten-Rhenium Thermocouples
A tungsten-rhenium (W-Re) thermocouple uses tungsten-rhenium alloy wires as its sensing elements. It is a high-temperature thermocouple offering a wide measuring range, good high-temperature stability and high sensitivity, and is widely used for temperature measurement above 1600 °C. The two common calibrations are Type C (WRe5-WRe26) and Type D (WRe3-WRe25). Because W-Re wires oxidise readily in high-temperature oxidising atmospheres, they are normally fitted with high-purity alumina, molybdenum or tungsten protection tubes, filled with high-temperature insulating material and vacuum-sealed, making them suitable for vacuum, reducing or inert atmospheres.
1. Product Types
- High-temperature tungsten-rhenium thermocouple
- Ultra-high-temperature tungsten-rhenium thermocouple
- Extreme-high-temperature tungsten-rhenium thermocouple
- Thermocouples for vacuum furnaces and sintering furnaces
- Tungsten-rhenium thermocouples for molybdenum-wire furnaces
- Thermocouples for crystal-growth furnaces
2. Product Descriptions
2.1 High-temperature tungsten-rhenium thermocouple
The ideal measuring range is 0 to 1650 °C. The protection tube is made of high-purity alumina or molybdenum, filled with a high-temperature insulating material (usable continuously below 1800 °C). The tube is evacuated and then cold-end sealed (the sealant is usable continuously below 100 °C) to ensure no residual oxygen remains inside. This product is suitable for vacuum, reducing and other inert atmospheres; its service life is short in oxidising atmospheres.
2.2 Ultra-high-temperature tungsten-rhenium thermocouple
The ideal measuring range is 0 to 2000 °C. It uses a single-layer protection tube made of Ø8 thick-walled molybdenum or tantalum, filled with an ultra-high-temperature insulating material (usable continuously below 2000 °C). The tube is evacuated and then cold-end sealed (the sealant is usable continuously below 150 °C) to ensure no residual oxygen remains inside. This product is suitable for vacuum, reducing and other inert atmospheres.
Important note: This series is intended for molybdenum-wire or tungsten-wire furnaces and is not suitable for graphite furnaces, because the molybdenum tube readily carburises at 1500 °C in a carbon atmosphere.
2.3 Extreme-high-temperature tungsten-rhenium thermocouple
The ideal measuring range is 0 to 2300 °C, of solid construction. It uses a single-layer protection tube made of tungsten, filled with an extreme-high-temperature insulating material (usable continuously below 2300 °C). The tube is evacuated and then cold-end sealed (the sealant is usable continuously below 150 °C) to ensure no residual oxygen remains inside. This product is suitable for vacuum, reducing and other inert atmospheres.
3. Selection and Application Notes
- Tungsten-rhenium thermocouples are intended for vacuum, reducing or inert atmospheres; their service life is significantly shortened in oxidising atmospheres, so a suitable protection tube must be selected.
- Molybdenum and tantalum protection tubes readily carburise in carbon-containing atmospheres; use with caution in graphite furnaces and similar applications.
- The cold-end sealant has a limited service temperature (100 °C or 150 °C); ensure the cold-end temperature does not exceed the continuous rating of the sealant.
- Confirm the specific calibration, protection-tube material and insertion length according to the actual operating conditions and the product selection panel.
Comments
No comments yet. Feel free to ask your model-selection or technical questions; we will reply after review.
Comments are closed on this page.